Pyroclassic Wood Heater – Heats 180+M2

The Pyroclassic is not a normal wood heater: it’s a high efficient, high performance mini wood furnace that heats for hours and hours

The firebox is made from ceramic – meaning it burns wood at a higher temperature and 3 times more efficient than traditional heaters

Designed 30+ years ago in New Zealand, the Pyroclassic heater heats 180+M2 comfortably

5.5 Star rated performance at 75% efficient and one clean heater at 0.3grms emissions

  • 12+ hour burn time
  • Ceramic round firebox
  • 450mm deep firebox
  • Extremy efficient at 75% dry or 82% with wet back fitted
  • Optional Wet back (hot water booster)
  • Cook top with optional oven
  • over 100 Colours available

Massive Heat Storage

With more than 40 kilograms of ceramic heat storage capacity, the Pyroclassic IV has the ability to store a massive amount of excess heat generated by a hot, bright fire inside its thick cylindrical fire chamber. This differs from the industry standard fire bricks, which are incapable of storing this level of excess heat, making it almost impossible to achieve longer burn times. The Pyroclassic IV is the only clean air approved fire to provide a 12 hour+ overnight burn*.

Unique Air Control

Other than the turboslide, the Pyroclassic IV’s air controls are fully automatic. This means the fire controls the rate at which oxygen is supplied to the wood fuel, allowing it to maintain the right burn temperatures for a complete secondary combustion (gasification). This process ensures the glass stays clean right throughout the burn cycle. If you were manually able to dampen the fire down, like with most other wood fires, this is when the real harm is done to the environment as tars and poisonous unburnt gasses are released into the air.

Water Heating Capabilities

The Pyroclassic IV can be fitted with a high output wetback, which can provide up to 3.7kW of hot water for all your domestic needs, making this a sustainable and much more affordable way of heating your water. The wetback sits in the upper chamber of the fire, clear of the combustion zones so it receives the full heat of the gases once they have gone through the secondary combustion phase. If you’re undecided whether you want a wetback, no problem! The wetback can be easily installed at a later date with no change to the fire itself.

Colour Range

If the traditional black box-style wood fire isn’t for you, the Pyroclassic IV is all about colour, with a range of more than 100 colours, from bold and bright to classic neutrals!


The Pyroclassic IV has a 10mm thick steel top plate which provides an excellent surface for cooking. You can boil the kettle, slow cook the casserole and even bake bread. To increase the versatility of the cook top plate you can purchase the cooktop oven, which comes with a handy trivet and embroidered oven mitt.

Reviews on the Pyroclassic heater


Height 625mm
Width 522mm
Depth 650mm


Rear- No Heat Shield 350mm
Rear - With Heat Shield 105mm
Side - No Heat Shield 480mm
Side - With Heat Shield 145mm
Corner - No Heat Shield 370mm
Corner - With Heat Shield 115mm


Emissions 0.3grms
Efficiency 74% Dry / 83.3% with wet back installed


Weight 150Kg
Flue Size 150mm
Heat Output 14.8kW
Fuel Consumption 1.1Kg/Ph